Loading ...
Loading ...
Loading ...
32 OPERATION
Cycle Guide
= default setting
●
= allowable option
* = Energy Saver
Cycle Fabric Type Dry Level Temp
Time in
Min.
Wrinkle
Care
Damp Dry
Signal
SENSOR DRY
Normal*
Work clothes, corduroys,
etc.
Normal
Medium
Elec.: 57
Gas: 63
● ●
Adjustable
Heavy Duty Jeans, heavy-weight items
Normal
High 54 ● ●
Adjustable
Perm.Press
Permanent press, synthetic
items
Normal
Low 32 ● ●
Adjustable
Anti
Bacterial
Do not use this cycle with
delicate fabrics.
Very High 70 ●
Delicates Lingerie, sheets, blouses
Normal
Low 28 ● ●
Adjustable
MANUAL DRY
Speed Dry
For small loads with short
drying times
Auto
High
25 ●
Adjustable
Adjustable ●
Air Dry
For items that require heat-
free drying such as plastics
or rubber
Off No Heat
30 ●
Adjustable ●
Sensor Dry Cycles
Sensor Dry cycles utilize LG’s unique dual sensor
system to detect and compare the moisture level
in clothes and in the air and adjust the drying time
as needed to ensure superior results. The dryer
automatically sets the dryness level and temperature
at the recommended setting for each cycle. The
estimated time remaining will be shown in the display.
Manual Dry Cycles
Use Manual Dry cycles to select a specic amount of
drying time and a drying temperature. When a Manual
Dry cycle is selected, the Estimated Time Remaining
display shows the actual time remaining in your
cycle. You can change the actual time in the cycle by
pressing the More Time or Less Time buttons.
NOTE
• To protect your garments not every dryness level,
temperature, or option is available with every cycle.
See the Cycle Guide for details.
• The Energy Saver option is turned on by default in
the Normal Cycle. Turn off the Energy Saver option
for a faster Normal cycle which begins with heated
drying. To turn the Energy Saver default off, press
and hold the Wrinkle Care button for three seconds.
ON or OFF appears in the display.
NSF International (formerly the National Sanitation
Foundation), certies that the ANTI-BACTERIAL cycle
reduces 99.9% of bacteria on laundry, and none of
the bacteria will carry over onto the next laundry load.
• The default settings for the ANTI-BACTERIAL cycle
are HIGH temperature and VERY DRY. These
default settings cannot be changed.
• Do NOT use this cycle with delicate items or fabrics.
Protocol P154 Sanitization
Performance of Residential
Clothes dryer
Loading ...
Loading ...
Loading ...