Loading ...
Loading ...
Loading ...
4 www.aeg.com
2. SAFETY INSTRUCTIONS
2.1 Installation
CAUTION!
The appliance must be installed by
quali󰘰ed personnel only.
Remove the packaging material.
Do not install or use the appliance if
damaged.
Comply with the instructions supplied
with the appliance.
Always pay attention when moving the
appliance. Always wear safety gloves.
Do not turn the appliance upside down
or tilt it! This may cause oil to leak from
the pump and damage the equipment.
Respect the minimum distance from
other appliances.
Make sure the appliance is installed
and secured to a 󰘰xed structure.
The sides of the appliance must be
adjacent to other equipment or units
having the same height.
2.2 Electrical connection
CAUTION!
Risk of 󰘰re and electric shock.
All the electrical connections must be
made by a quali󰘰ed electrician.
The appliance must be earthed.
Make sure that all the electrical data
shown on the data plate correspond
to those of the system. Otherwise,
contact an electrician.
Always use an electrical outlet with a
correctly installed protective contact.
Do not use multi-plug adapters or
extension cables.
Make sure not to damage the mains
plug and the mains cable. If the power
cable must be replaced, this should be
carried out by our Assistance Centre.
Shock protection devices must be
fastened in such a way that they
cannot be removed without tools.
Connect the mains plug to the mains
socket only once installation has been
completed.
Do not connect the mains plug if the
mains socket is loose.
Do not pull the mains cable to
disconnect the appliance. Pull only the
mains plug.
Use only suitable isolation devices:
circuit breakers, fuses (screw type
fuses must be removed from the fuse
holder), earth fault current releases
and relays.
The electric system must be equipped
with an isolation device that allows
you to disconnect the appliance from
the mains at every pole. The isolation
device must have a contact opening
width of a minimum 3 mm.
This appliance complies with the EEC
directives.
Loading ...
Loading ...
Loading ...