Loading ...
Loading ...
Loading ...
21
EN
Choosing an Auxiliary
Function
These functions can allow the Robot Cleaner to
clean more effectively by using the auxiliary
functions.
Repeat Function
The Robot Cleaner repeats the selected
cleaning mode.
To activate Repeat function, press the Repeat
button on the remote control.
• After cleaning is finished, the Robot Cleaner
changes its direction and cleans the same
area again.
• To cancel the Repeat function, press the
Repeat button again.
NOTE
• In the Repeat function, the Robot Cleaner
cleans for at least 5 minutes, unless the
cleaning is completed within 5 minutes.
• Even if the Repeat function is not selected,
the Robot Cleaner repeats the cleaning if the
area was cleaned within 30 minutes.
Turbo Function
The Robot Cleaner suction power is increased.
Use this function for cleaning where strong
suction power is necessary.
• To activate the Turbo function, press the
Turbo button on the remote control or the
Control Panel.
Note
• When the Turbo function operates, it uses
more battery power.
• When the Turbo function operates, the noise
of the Robot Cleaner will become louder.
Smart Turbo Function
The Robot Cleaner automatically detects
carpets, corners or dusty places and increse the
suction power.
• To activate Smart Turbo function, press the
Smart turbo button on the remote control.
NOTE
• When the Smart Turbo function operates, the
noise of the Robot Cleaner will become
louder.
• The Smart Turbo function is factory default
setting.
Loading ...
Loading ...
Loading ...