Loading ...
Loading ...
Loading ...
19
EN
Choosing a Cleaning Mode
Getting Started
Select a cleaning mode on the control panel or
on the remote control.
1
Insert the power plug of the Home Station
into a power outlet.
2
Press the Mode button to select the
desired mode as follows.
•
: the Edge mode
•
: the Zigzag mode
•
: Spiral Spot mode
3
Press the Start/Stop button to start
cleaning.
NOTE
• The selected mode displays on the control
panel.
• To change the cleaning mode during
operation, press the Start/Stop button to stop
the Robot Cleaner and then select another
cleaning mode.
• Once selected, the new cleaning mode is
retained even after the power supply is turned
off. (For the Edge and the Zigzag modes
only.)
• The Robot Cleaner utilizes the AI (Artificial
Intelligence) technology in the Edge and the
Zigzag modes.
− The 3D DUAL Eye is included with the 3D
camera sensor, 3D obstacle detection
sensor. The Robot Cleaner learns where to
go and identifies objects it needs to avoid.
− The Robot Cleaner detects obstacles using
the 3D DUAL Eye and remembers the
locations of objects in the area being
cleaned.
− The obstacle detection sensor of the 3D
DUAL Eye may not operate normally if there
is a human shape or something similar
within the environment.
− When the Smart Turbo function is selected,
the Robot Cleaner automatically detects
dust, carpets or corners and then adjusts the
suction power when cleaning.
− If the suction power increases automatically
in the Smart Turbo mode, the operating
noise will become louder.
Edge Mode
The Robot Cleaner moves in zigzag movements
around the whole house and cleans thoroughly
including the edges up to the wall. When a wall
is detected, the Robot Cleaner reduces its
speed and temporarily increases the suction
power.
• When a wall is detected, the Robot Cleaner
reduces its speed and temporarily increases
the suction power.
Zigzag Mode
The Robot Cleaner repeats a zigzag operation
to clean the whole house without coming into
contact with the wall.
• It is suitable for quick cleaning or a large
cleaning area without any obstacles.
• Factory default setting is the Zigzag mode.
Loading ...
Loading ...
Loading ...