2017 DODGE CHARGER SRT User Manual

Loading ...

ENGINE BREAK-IN RECOMMENDATIONS

3.6L Engine Break-In

For vehicles equipped with the 3.6L, use the following engine break-in recommendations:

A long break-in period is not required for the drivetrain (engine, transmission, clutch, and

rear axle) in your new vehicle.

Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km),

speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.

While cruising, brief full-throttle acceleration within the limits of local traffic laws

contributes to a good break-in. However, wide-open throttle acceleration in low gear can

be detrimental and should be avoided.

The engine oil, transmission fluid, and axle lubricant installed at the factory is high-quality

and energy-conserving. Oil, fluid, and lubricant changes should be consistent with

anticipated climate and conditions under which vehicle operations will occur . For the

recommended viscosity and quality grades, refer to “Maintenance Procedures” in “Main-

taining Y our V ehicle” in this guide.

CAUTION!

Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result.

NOTE:

A new engine may consume some oil during its first few thousand miles (kilometers) of

operation. This should be considered a normal part of the break-in and not interpreted as

an indication of difficulty. Please check your oil level with the engine oil indicator often

during the break in period. Add oil as required.

5.7L Engine Break-In

For vehicles equipped with the 5.7L, use the following engine break-in recommendations: