Loading ...
Loading ...
Loading ...
Component Fluid, Lubricant, or Genuine Part
Engine Oil W e recommend you use API Certified SAE 5W -20 Engine
Oil, meeting the requirements of FCA Material Standard
MS-6395 such as Mopar , Pennzoil, and Shell Helix. Refer
to your engine oil filler cap for correct SAE grade.
Engine Oil Filter W e recommend you use a Mopar Engine Oil Filter.
Spark Plugs W e recommend you use Mopar Spark Plugs.
Fuel Selection –
5.7L Engine
89 Octane Recommended – 87 Octane Acceptable, 0-15%
Ethanol.
Engine — 6.4L
Component Fluid, Lubricant, or Genuine Part
Engine Coolant W e recommend you use Mopar Antifreeze/Coolant 10 Y ear/
150,000 Mile Formula OAT (Organic Additive Technology).
Engine Oil For best performance and maximum protection under all
types of operating conditions, the manufacturer only recom-
mends full synthetic engine oils.
The manufacturer recommends the use of Pennzoil Ultra
0W -40 or equivalent Mopar engine oil meeting the require-
ments of FCA Material Standard MS-12633 for use in all
operating temperatures.
Engine Oil Filter W e recommend you use Mopar Engine Oil Filters.
Spark Plugs W e recommend you use Mopar Spark Plugs.
Fuel Selection 91 Octane or higher , 0-15% Ethanol.
Chassis — 3.6L & 5.7L
Component Fluid, Lubricant, Or Genuine Part
Automatic Transmission —
8-Speed Transmission
Use only Mopar ZF 8&9 Speed ATF Automatic Transmission
Fluid, or equivalent. Failure to use the correct fluid may
affect the function or performance of your transmission.
Brake Master Cylinder
W e recommend you use Mopar DOT 3 and SAE J1703. If DOT
3 brake fluid is not available, then DOT 4 is acceptable.
Front Axle We recommend you use Mopar Synthetic Gear Lubricant
SAE 75W90 (API GL-5).
Rear Axle W e recommend you use Mopar OD Synthetic Gear Lubri-
cant SAE 75W85 (API GL-5).
Transfer Case W e recommend you use Mopar Transfer Case Lubricant for
BorgW arner 44–40.
MAINTAINING YOUR VEHICLE
221
Loading ...
Loading ...
Loading ...