Loading ...
Loading ...
Loading ...
The memory seat switch is located on the driver’ s door trim panel. The switch consists of
three buttons: The set (S) button, which is used to activate the memory save function, and
the memory (1) and (2) buttons, which are used to recall either of two pre-programmed
memory profiles.
Programming The Memory Feature
NOTE:
Saving a new memory profile will erase an
existing profile from memory.
To create a new memory profile, perform the
following:
1. Place the vehicle’s ignition to the ON/
RUN position.
2. Adjust all memory profile settings to
desired preferences (i.e., seat, side mir-
ror, power tilt and telescopic steering
column [if equipped], and radio station
presets).
3. Push and release the set (S) button on
the memory switch.
4. Within five seconds, push and release memory button (1) or memory button (2). The
instrument cluster display will show which memory position has been set.
NOTE:
• Memory profiles can be set without the vehicle in P ARK, but the vehicle must be in
PARK to recall a memory profile.
• To set a memory profile to your key fob, refer to “Linking And Unlinking The Remote
Keyless Entry Key Fob To Memory” in this section for further information.
Linking And Unlinking The Remote Keyless Entry Key Fob To Memory
Your key fobs can be programmed to recall one of two pre-programmed memory profiles
by pushing the unlock button on the key fob.
NOTE:
Before programming your key fobs you must select the “Memory To FOB” or “Personal
Settings Linked To Fob” feature through the Uconnect system screen. Refer to “Uconnect
Settings” in “Understanding Y our Instrument Panel” in the Owner’s Manual on
www.dodge.com/en/owners/manuals for further information.
Memory Seat Switches
GETTING STARTED
58
Loading ...
Loading ...
Loading ...