Loading ...
Loading ...
Loading ...
NOTE:
• If “Unlock All Doors 1st Press” is programmed, all doors will unlock when you grab hold
of the front driver's door handle. To select between “Unlock Driver Door 1st Press” and
“Unlock All Doors 1st Press,” refer to the “Uconnect Settings” in the Owner's Manual
on www .dodge.com/en/owners/manuals or “Programmable Features” for further infor-
mation.
• If a key fob is detected in the vehicle when locking the vehicle using the power door
lock switch, the doors will unlock and the horn will chirp three times. On the third
attempt, your key fob can be locked inside the vehicle.
• After pushing the button, you must wait two seconds before you can lock or unlock the
vehicle using the door handle. This is done to allow you to check if the vehicle is locked
by pulling the door handle without the vehicle reacting and unlocking.
• If a Keyless Enter-N-Go — Passive Entry door handle has not been used for 72 hours,
the Keyless Enter-N-Go — Passive Entry feature for that handle may time out. Pulling
the deactivated front door handle will reactivate the door handle's Keyless Enter -N-Go
— Passive Entry feature.
To Enter The Trunk
With a valid key fob located outside the
vehicle and within 5 ft (1.5 m) of the trunk,
push the button on the right side of appli-
que which is located on the trunk.
Whenever the vehicle is unlocked, you can
enter the trunk by pushing the button on the
right side of the applique.
NOTE:
Please refer to “Keyless Enter-N-Go — Pas-
sive Entry” in “Things To Know Before
Starting” in the Owner's Manual on
www.dodge.com/en/owners/manuals for
further information.
Trunk Passive Entry Button
GETTING STARTED
18
Loading ...
Loading ...
Loading ...