Loading ...
Loading ...
Loading ...
To program your key fobs, perform the following:
1. Place the vehicle’s ignition to the OFF position.
2. Select desired memory profile (1) or (2). The system will recall any stored settings for
this profile. W ait for the system to complete the memory recall before continuing to
step three.
NOTE:
If a memory profile has not already been set, refer to "Programming The Memory Feature"
in this section for instructions on how to set a memory profile.
3. Once the profile has been recalled, push and release the set (S) button on the memory
switch, then push and release memory button (1) or memory button (2) accordingly.
“Memory Profile Set” (1 or 2) will display in the instrument cluster display .
4. Push and release the lock button on the key fob within 10 seconds.
NOTE:
Your key fobs can be unlinked from your memory settings by pushing the set (S) button,
and within 10 seconds push the unlock button on the key fob.
Memory Position Recall
NOTE:
The vehicle must be in PARK to recall memory positions. If a recall is attempted when the
vehicle is not in P ARK, a message will display in the instrument cluster display .
To recall the memory settings for driver 1, push memory button (1) on the driver's door or
the unlock button on the key fob linked to memory position 1.
NOTE:
If the vehicle is equipped with Passive Entry, the memory settings will be recalled with a
Passive Entry Unlock into the driver's door using the key fob linked to position 1.
To recall the memory setting for driver 2, push memory button (2) on the driver's door or
the unlock button on the key fob linked to memory position 2.
NOTE:
If the vehicle is equipped with Passive Entry, the memory settings will be recalled with a
Passive Entry Unlock into the driver's door using the key fob linked to position 2.
A recall can be cancelled by pushing any of the memory buttons (S, 1, or 2) on the driver's
door during a recall. When a recall is cancelled, the driver's seat or power tilt and
telescopic steering column (if equipped) stop moving. A delay of one second will occur
before another recall can be selected.
GETTING STARTED
59
Loading ...
Loading ...
Loading ...