Loading ...
Loading ...
Loading ...
2. Push the “Launch RPM Set-Up” button on the touchscreen. This screen will allow you
to adjust your launch RPM’ s for optimum launch/traction.
3. Push the “Activate Launch Control” button on the touchscreen.
4. Make sure the vehicle is not moving.
5. Make sure the steering wheel is pointing straight.
6. Hold the brake and make sure the vehicle is in “DRIVE” or “AutoStick” position.
7. While holding the brake, rapidly apply the accelerator pedal to wide open throttle. The
engine speed will hold at the RPM that was set in the “Launch RPM Set-up” screen.
NOTE:
Messages will appear in the instrument cluster to inform the driver if one or more of the
above conditions have not been met.
8. When conditions 4 through 7 have been met, the instrument cluster display will read
“Launch Ready Release Brake”.
9. Keep the vehicle pointed straight.
Launch control will be active until the vehicle reaches 62 mph (100 km/h), at which point
the ESC system will return to its current ESC mode.
Launch control will abort before launch completion, display “Launch Aborted” in the
cluster under any the following conditions:
• The accelerator pedal is released during launch. ESC system continues in ESC Full ON.
• The ESC system detects that the vehicle is no longer moving in a straight line.
• The “ESC OFF” button is pushed to change the system to another mode.
NOTE:
After launch control has been aborted, ESC will return to its current ESC mode.
CAUTION!
Do not attempt to shift when the drive wheels are spinning and do not have traction.
Damage to the transmission may occur .
SRT
177
Loading ...
Loading ...
Loading ...