Loading ...
Loading ...
Loading ...
En
8
Mixer section
1 TRIM control
Adjusts the individual channel output gain.
2 EQ (HI, MID, LOW) controls
Boosts or cuts frequencies for the different channels.
3 FILTER control
Turns on the filter effect for each channel.
When the control is set to the middle position, the original sound
outputs.
Turn left: A cut-off frequency for the low-pass filter decreases
gradually.
Turn right: A cut-off frequency for the high-pass filter increases
gradually.
4 HEADPHONES CUE 1/2 buttons
Turns on to output sound from the headphones when the button is
pressed.
! Press it again to turn off to output.
[SHIFT] + press:
The track’s tempo can be set by tapping the button. (Tap function)
5 Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[SHIFT] + move:
Uses the fader start function.
6 Crossfader
Switches the audio output of the left or right deck.
[SHIFT] + move:
Uses the fader start function.
7 MASTER LEVEL control
Adjusts the master sound level output.
8 HEADPHONES LEVEL control
Adjusts the output level from the [PHONES] output terminal.
9 HEADPHONES CUE MASTER button
Turns on to output the master sound from the headphones.
! Press it again to turn off to output.
a CHANNEL LEVEL indicator
Displays the sound level of the respective channels before passing
through the channel faders.
Effect section
This section is used to control the two effect units (FX1 and FX2).
Controls and buttons to operate the FX1 unit are located on the left side
of the controller, those to operate the FX2 unit are located on the right
side of the controller.
1 Effect 1 button
Turns the effect on/off.
[SHIFT] + press:
Switches the effect type.
2 Effect 2 button
Turns the effect on/off.
[SHIFT] + press:
Minimizes the beat fraction for synchronizing the effect sound of
beat FX each time the button is pressed.
3 Effect 3 button
Turns the effect on/off.
[SHIFT] + press:
Maximizes the beat fraction for synchronizing the effect sound of
beat FX each time the button is pressed.
4 Effect level control
These adjust the effects’ parameters.
= “Using effects” (page 16)
Loading ...
Loading ...
Loading ...