Loading ...
Loading ...
Loading ...
En
16
Using trans
This is a function to cut sound in tandem with the BPM beat timing of
the track loaded in the deck.
1 Press the [SAMPLER (TRANS)] mode button while
pressing the [SHIFT] button.
Switches to the pad trans mode.
Beat of the pad trans are assigned to the respective pads as shown
below.
1/16 beat
1 beat
1/4 beat
1/3 beat
1/8 beat
2 beats
1/2 beat
Manual
Sound is cut while the manual pad is pressed.
2 Keep pressing the pad during playback.
Cuts the sound in tandem with the beat timing while pressing the pad.
! The pad trans mode does not work when the channel fader is at
the lowest position. Move the channel fader up to use the pad
trans mode.
3 Release your finger from the pad.
Returns to the normal playback.
Switching the tempo of the pad trans
mode
“Auto tempo mode” and “manual tempo mode” are available for the pad
trans mode to set the tempo.
! Auto tempo mode is the default setting.
Auto tempo mode
The BPM value of the track becomes the guide of the tempo.
Manual tempo mode
The BPM value of the track can be calculated from the interval of tapping
of the [HEADPHONES CUE 1/2] button while pressing the [SHIFT]
button.
Switching to the Manual tempo mode
Press the [HEADPHONES CUE 1/2] button more than
three times while pressing the [SHIFT] button in the auto
tempo mode.
! When [HEADPHONES CUE 1/2] button is pressed longer than 1
second while pressing the [SHIFT] button in the manual tempo
mode, the tempo mode is switched to the auto tempo mode.
! The BPM value set in the manual tempo mode is not displayed.
Using effects
Serato DJ Lite includes two effect units, FX1 and FX2. Three effects per
effect unit can be selected for the respective units.
Effect unit FX1 is applied to decks 1 and 3, effect unit FX2 is to decks 2
and 4.
Serato DJ Lite effects unit screen display
When [FX] on the computer screen is clicked, the [FX] panel is displayed
on the computer screen.
1 Displays the effect type.
2 Displays the effect time.
3 Displays whether the effect is on or off.
4 Displays the effect’s level.
Controlling this unit’s effect level controls the levels of all three Serato
DJ Lite effects simultaneously.
This unit can be used to control up to three effects simultaneously.
Operating effects
The explanation below describes operation of the first effect for effect
unit FX1 as an example.
Note that the procedure described in this manual is just one example;
operation is also possible using other procedures.
1 Press the effect 1 button while pressing the [SHIFT]
button to select the type of the first effect.
The effect type is displayed on the Serato DJ Lite screen.
2 Operate an effect level control to adjust the effect
level.
The positions of all three effect level controls on the Serato DJ Lite
screen move simultaneously.
! The positions of the effect level controls cannot be moved
individually.
3 Operate the effect 2 or effect 3 button while
pressing the [SHIFT] button to adjust the effect time.
4 Press the effect 1 button to turn the first effect on.
The first effect’s [ON] button on the Serato DJ Lite screen is highlighted.
! After turning the effect on, you can repeat steps 2 and 3 to adjust the
effect level and effect time.
5 Press the effect 1 button to turn the first effect off.
Operating the three effects
simultaneously
The explanation below describes operation of three effects
simultaneously as an example.
Note that the procedure described in this manual is just one example;
operation is also possible using other procedures.
Loading ...
Loading ...
Loading ...