Loading ...
Loading ...
Loading ...
En
14
Playing tracks and outputting the sound
The following describes the procedure for outputting the channel 1
sound as an example.
! Set the volume of the device connected to the [MASTER] output
terminals (power amplifier, powered speakers, etc.) to an appropriate
level. Note that the output sound may be loud if the volume is set too
high.
Mixer section
3 TRIM control
4 EQ (HI, MID, LOW) controls
5 FILTER control
6 Headphones CUE buttons
7 Channel fader
8 Crossfader
9 MASTER LEVEL control
a HEADPHONES LEVEL control
b Headphones CUE MASTER button
c CHANNEL LEVEL indicator
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
TRIM control Turned fully counterclockwise
EQ (HI, MID, LOW) controls 12 o’clock position
FILTER control 12 o’clock position
Channel fader Minimum (lowest) position
MASTER LEVEL control Turned fully counterclockwise
Crossfader Center position
2 Press the [f] button to play the track.
3 Turn the [TRIM] control.
Adjust the [TRIM] control so that the channel level indicator’s orange
indicator lights at the peak level.
4 Move the channel fader to the maximum level.
5 Turn the [MASTER LEVEL] control to adjust the
audio level of the speakers.
Adjust the audio level output from the [MASTER] output terminals to an
appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
HEADPHONES LEVEL control Turned fully counterclockwise
1 Press the headphones [CUE] button for channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and the Serato DJ Lite software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the operating instructions and the Serato DJ Lite software
manual.
! The operating instructions of this unit can be downloaded from the
Pioneer DJ site. For details, see “Viewing the latest version of the
operating instructions” (page 20).
! The Serato DJ Lite software manual can be downloaded from Serato.
com. For details, see “Downloading the Serato DJ Lite software
manual” (page 20).
Quitting the system
1 Quit Serato DJ Lite.
When quitting the software, a message for confirming that you want to
close it appears on the computer’s screen. Click [Yes] to close.
2 Disconnect the USB cable from your computer.
Loading ...
Loading ...
Loading ...