Loading ...
Loading ...
Loading ...
8
INSTALLATION
INSTALLATION
Tools Needed
a
Pliers
b
Flat-blade Screwdriver
c
Level
Product Specifications
The appearance and specifications listed in this manual may vary due to constant product improvements.
Model WT7850H*A
Electrical requirements 120 VAC @ 60 Hz
Min. / Max. water pressure 20 - 120 psi (138 - 827 kPa)
Dimensions
27” (W) X 28 3/8” (D) X 44 1/4” (H), 57 1/4” (H with lid (door) open)
68.6 cm (W) X 72.1 cm (D) X 113 cm (H), 145.3 cm (H with lid (door) open)
Net weight 138.9 lb (63 kg)
Max spin speed 950 RPM (±50 rpm)
WARNING
• Moving or installation of the appliance requires two or more people. Failure to follow these
instructions may result in injury.
• Store and install the appliance where it will not be exposed to temperatures below freezing or
exposed to outdoor weather conditions. Failure to follow this warning can cause product or part
failure, serious injury, fire, electric shock, or death.
• Properly ground the washer to conform with all governing codes and ordinances. Failure to follow
this warning can cause serious injury, fire, electric shock, or death.
• To reduce the risk of electric shock, do not install the appliance in humid spaces. Failure to follow
this warning can cause serious injury, fire, electric shock, or death.
• To ensure proper airflow, do not block the large opening on the bottom of the washer with carpeting
or other materials.
• Do not remove the ground prong. Do not use an adapter or extension cord. Plug into a grounded
3-prong outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
• Certain internal parts are intentionally not grounded and may present a risk of electric shock
only during servicing. Service personnel-do not contact the following parts while the appliance is
energized. : pump, motor, noise filter cover, and heater (on applicable models).
Loading ...
Loading ...
Loading ...