Loading ...
Loading ...
Loading ...
31
OPERATION
ENGLISH
Option Buttons
Your washer features several additional cycle
options that customize cycles to meet your
individual needs. To use these options, select the
desired option after selecting the desired cycle.
After selecting the desired cycle and settings,
press the cycle option button(s) for the option(s)
you would like to add. The button will light when
that option is selected. If the selected option is
not allowed for the selected cycle, the chime will
sound twice to alert you and the LED will not
illuminate.
NOTE
• To protect your garments, not every feature is
available with every cycle.
Steam
Adding the Steam option to a wash cycle helps
provide superior cleaning performance. By using
hot steam, the fabrics will get the cleaning benefits
of a very hot wash.
WARNING
• Do not touch the lid during Steam cycles. The
lid surface can become very hot. Allow the lid
lock to release before opening the door.
• Do not attempt to override the lid lock mecha-
nism or reach into the washer during a Steam
cycle. Steam can cause severe burns.
NOTE
• The Steam option cannot be used with all
cycles.
• The Steam option is automatically deselected
if Turbo Wash™ is selected for the Normal,
Heavy Duty, Sanitary, and Bright Whites™
cycles.
• Steam may not be clearly visible during the
Steam cycles. This is normal. Too much steam
could dam age clothing.
• Do not use Steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.
Cold Wash
This option saves energy by using cooler water
while increasing the wash and rinse times to
maintain wash performance.
NOTE
• Wash time will increase up to several minutes
with this option.
• For best wash results, only wash small loads
(less than 8 lb.) with this option.
Delay Wash
Once you have selected the cycle and other
settings, press this button to delay the start of the
wash cycle.
Each press of the button increases the delay time
by 1 hour, for up to 19 hours. Once the desired
delay time is set, press the Start/Pause button to
start the delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer will automatically
shut off after 60 minutes and all cycle settings
will be lost.
Signal
The washing machine plays a melody when the
wash cycle has finished. The volume of the melody
is adjusted using the Signal button.
• Press the Signal button repeatedly to adjust the
volume of the signal.
• The signal can be turned On or Off. When the
LED on the button turns off, the signal is off. The
signal volume can be adjusted at any time as
long as the washer is turned on.
Turbo Wash™
Adding the Turbo Wash™ option to a cycle
reduces the length of the cycle while maintaining a
similar wash performance.
NOTE
• The Turbo Wash™ option cannot be used with
all cycles.
• Turbo Wash™ defaults On for Normal, Pre
Wash+Normal and Speed Wash cycles. but,
the Turbo Wash™ option can not turn off in
normal cycle only.
Loading ...
Loading ...
Loading ...