Loading ...
Loading ...
Loading ...
30
OPERATION
Special Care Features
Press the Special Care button to select
specialized cycles or add features to standard
cycles. Press the button repeatedly to move
through the available features.
NOTE
• To protect your garments, not every feature is
available with every cycle.
• If the Start/Pause button is not pressed within
60 minutes to start the cycle, the washer will
shut off and all settings will be lost.
Soak
This option provides a 30-minute presoak prior
to the start of the selected cycle. Use the Soak
option to presoak garments to help remove
difficult spots or stains on fabrics. At the end of the
presoak time, the selected cycle will begin with the
same water used for the soak.
NOTE
• You cannot select the Soak option for the
Tub Clean cycle.
Stain Care
Use this option for heavily soiled loads that need
improved stain treatment. When Stain Care is
selected, the wash cycle will begin with warm
water to help prevent the setting of certain types
of stains. Then, as the cycle progresses, hot water
will be added to gradually increase the water
temperature to help remove stains that require
treatment at higher temperatures.
NOTE
• Best results are obtained with smaller loads
(less than 6 lb.)
• If you select Stain Care, the Cold Wash option
is not available.
Rinse+Spin
Select this option to rinse and spin a load
separately from a regular cycle. This can be
helpful in preventing fresh stains from setting
in fabrics. You can change the spin speed by
pressing the Spin button.
1
Press the Power button to turn on the washer.
2
Press the Special Care button repeatedly until
Rinse+Spin is selected.
3
Press the Start/Pause button.
Special Drain Feature
This washer is equipped with a special drain
feature that is designed to make your washer as
safe as possible. If the washer is paused or shut
off while there is still water in the tub, the water
will drain automatically after several minutes
of inactivity. This helps keep children safe by
reducing the possibility of water remaining in the
tub.
Any water remaining in the tub will automatically
drain 4 minutes after the washer has shut off. If the
washer is paused and the Start/Pause button is
not pressed within 60 minutes, the washer will shut
off and all cycle settings will be lost. And any water
remaining in the tub will be drained.
The washer can be turned on or restarted any time
before the drain begins. However, once the washer
begins to drain, all controls and functions will
be disabled until the water has been completely
drained and the washer shuts off.
Add Garments
• If you’ve forgotten to add an item or need to
remove foreign objects like coins or keys after
the cycle has started, the best time to do so is
while the Add Garments indicator is on. Once
the indicator turns off, adding garments may
affect the cycle time or wash performance.
1
Press Start/Pause. The cycle pauses and the
lid (door) unlocks.
2
Open the lid (door), add garments or remove
foreign objects, and close the lid (door).
3
Press the Start/Pause button to start the cycle.
The cycle continues automatically.
Loading ...
Loading ...
Loading ...