Loading ...
Loading ...
Loading ...
44
TROUBLESHOOTING
Problem Possible Cause & Solutions
Vibrating noise
Packaging materials were not removed.
• See Unpacking and Removing Shipping Material in the INSTALLATION
section.
Wash load may be unevenly distributed in the drum.
• Pause the cycle and redistribute the load after the lid (door) unlocks.
Not all leveling feet are resting firmly and evenly on the floor.
• See Leveling the Appliance in the INSTALLATION section.
Floor not rigid enough.
• Make sure that the floor is solid and does not flex. See Flooring in the
INSTALLATION section.
Squeaking noise
Packaging materials were not removed.
• See Unpacking and Removing Shipping Material in the INSTALLATION
section.
Banging noise
when washer is
filling with water
(Water Hammer)
Plumbing in the home moves or flexes when the water valves in the washer
shut off.
• Water hammer is not caused by a defect in the washer. Install water hammer
arrestors (purchased separately at hardware or home improvement store)
between the fill hose and the washer for best results.
Household water supply pressure is very high.
• Adjust household water supply regulator to a lower pressure or contact a plumber.
Loading ...
Loading ...
Loading ...