Loading ...
Loading ...
Loading ...
38
MAINTENANCE
NOTE
• Never load laundry while using Tub Clean.
The laundry may be damaged or contaminated
with cleaning products. Make sure to run the
Tub Clean cycle only when the tub is empty.
• Leave the lid (door) open after finishing the
laundry, to keep the tub clean.
• Tub Clean should be repeated monthly.
• If mildew or musty smell already exists, run
Tub Clean once a week for three consecutive
weeks.
• Do not exceed the manufacturer’s recommended
amount when adding bleach or powdered
cleaners. Powdered cleaner may remain in the
tub after cleaning.
Removing Mineral Buildup
In areas with hard water, mineral scale can form
on internal components of the washer. Periodically
clean the mineral buildup on the internal
components to extend the lifespan of the washer.
Use of a water softener is recommended in areas
with hard water.
• Use a descaler, to remove visible mineral buildup
on the washer tub.
• After descaling, always run the Tub Clean cycle
before washing clothing.
• Mineral scale and other spots may be removed
from the stainless steel tub using a soft cloth
soaked in stainless steel cleaner.
• Do not use steel wool or abrasive cleaners.
Leaving the Lid (Door) Open
• If the washer will not be used for several days,
leave the lid (door) open overnight to allow the
tub to dry.
Cleaning the Dispenser Drawer
Detergent and fabric softener may build up in the
dispenser drawer. Remove the drawer and inserts
and check for buildup once or twice a month.
1
Remove the drawer by pulling it straight out
until it stops. Lift up on the front of the drawer
and pull it completely out.
2
Remove the inserts from the two
compartments.
3
Clean the inserts and drawer with warm water.
• Use a soft cloth or brush for cleaning and to
remove any residue.
WARNING
• Do not spray water inside the washer. Doing
so may cause fire or electric shock.
4
Wipe off any moisture with a dry towel or cloth
after cleaning.
5
To clean the drawer opening, use a small, non-
metal brush to clean the recess. Remove all
residue from the upper and lower parts of the
recess.
6
Return the inserts to the proper compartments
and replace the drawer.
• Set the drawer into the opening at an angle,
then lower it and slide it into place.
NOTE
• If you use a descaler or tub cleaner during the
Tub Clean cycle, use the Rinse+Spin option to
rinse the washer tub before running your next
wash cycle.
Loading ...
Loading ...
Loading ...