Loading ...
Loading ...
Loading ...
Cleaning and maintenance
176
Setting programmed Vapor Clean
It is possible to program the Vapor Clean
start time, like any cooking function.
1. After selecting the Vapor Clean special
function, press the symbol .
2. Enter the time at which you require the
Vapor Clean function to end (for
example at 7:30 p.m. first touch the hours
box, then the numbers 1 and 9; touch the
minutes box, then the numbers 3 and 0).
3. Press the symbol to confirm.
The appliance waits until the set start time to
start the cleaning cycle.
End of the Vapor Clean cycle
1. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
2. Use a non-scratch sponge with brass
filaments on hard to remove deposits.
3. In case of grease residues use specific
oven cleaning products.
4. Remove the residual water inside the
oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a fan-assisted function at 160°C for
approximately 10 minutes.
We recommend wearing rubber
gloves for these operations.
We recommend removing the
door in order to make the manual
cleaning of the parts that are
difficult to reach easier.
Loading ...
Loading ...
Loading ...