Loading ...
Loading ...
Loading ...
En
7
Part names and functions
Rear panel
4 5
2
6
7
1
3
1 Cord hook
Secure the AC adapter’s power cord and USB cable on this hook.
! This prevents the power cord and USB cable from being acci-
dentally pulled and the plugs from being disconnected from the
terminals.
! If the AC adapter’s power cord or the USB cable is disconnected
during operation, the sound may be interrupted or the unit may
restart.
AC adapter’s power cord
Cord hook USB cable
2 DC IN terminal
Connect the DC plug of the included AC adapter.
! Connect the power cord after all the connections between
devices have been completed.
! Be sure to use the power cord and AC adapter included with this
product.
3 USB-B terminal
Connect to a computer or Android device.
! Be sure to connect directly using the USB cable included with
this product.
!
A USB hub cannot be used.
! When connecting with an Android device, a separately sold USB
conversion cable is required.
Select a USB conversion cable matching the shape of the USB
terminal of your Android device.
! The brightness of the buttons and JOG illumination that light is
dimmed when running on USB bus power.
4 USB-A terminal
Connect to an iPhone / iPad.
! Be sure to connect directly using the cable included with the
iPhone / iPad.
! A USB hub cannot be used.
! When connecting an iPhone / iPad, connect the AC adapter. This
unit cannot run on USB bus power.
! This unit can recharge an iPhone / iPad using the cable included
with the iPhone / iPad.
! An iPhone / iPad cannot be charged when the power of the
iPhone / iPad is off or when there is no battery power remaining.
5 Kensington security slot
This hole is used to attach an anti-theft wire lock.
6 MASTER output terminals (RCA pin jacks)
Connect speakers with a built-in amplifier, power amplifier, etc.
! Unbalanced output is supported.
7 MIC input terminal (1/4” TS jack)
Connects a microphone here.
! Supports unbalanced input only.
Side panel
1
1 PHONES output terminals (1/4” stereo phone jack and
3.5 mm stereo mini jack)
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs
(Ø 3.5 mm) can be used.
! Connect stereo headphones with an impedance of 32 W or
higher. Headphones with an impedance less than 32 W and
mono headphones are not supported.
! Do not connect headphones simultaneously to the stereo phone
jack and the stereo mini-phone jack.
Loading ...
Loading ...
Loading ...