Loading ...
Loading ...
Loading ...
w
SuperCool is selected.
w
The remaining running time and the SuperCool
symbol are displayed in the fridge compartment field.
w
The lowered temperature is shown by the down
arrows.
w
After the remaining running time has elapsed the
appliance returns to normal mode. The temperature is
set to the preset value again. Up arrows show the
temperature increase.
Switching SuperCool off ahead of schedule
u
Press menu.
u
Press the navigation arrow until SuperCool and the
remaining running time are displayed.
u
Press on the remaining running time.
u
Press STOP.
w
SuperCool is switched off.
w
The temperature is set to the preset value again. Up arrows
show the temperature increase.
5.4.4 Fan
With the fan you can rapidly cool large quanti-
ties of fresh food or achieve a relatively even
distribution of temperature across all the
storage levels.
The forced-air cooling is to be recommended:
-
at high room temperature (above33 °C )
-
at high humidity
The forced-air cooling uses slightly more energy. To save
energy, the fan switches off automatically when the door is
open.
Switching on the fan
u
Press menu.
u
Press the navigation arrows until the fan is
displayed.
u
Press ON.
w
The fan is switched on.
To switch off the fan
u
Press menu.
u
Press the navigation arrows until the fan is
displayed.
u
Press OFF.
w
The fan is switched off.
5.4.5 Shelves
Moving or removing shelves
The shelves are prevented from being pulled out accidentally
by pull out stops.
Fig. 30
u
Lift the shelf and pull forward a little.
u
Adjust the height of the shelf. To do this move the slots along
the supports.
u
In order to remove the shelf fully, place it at a slant and pull
out towards the front.
u
Insert shelf with the raised edge pointing upwards at the
back.
w
The food does not freeze onto the rear wall.
w
Food is prevented from falling out.
Do not store any goods on the humidity regulation plate of the
bottom shelf.
Dismantling shelves
u
The shelves can be
dismantled for cleaning.
5.4.6 Using the sectioned shelf
Fig. 31
Adjusting the height:
u
Pull the glass plates out forwards one by one.
u
Remove the support from the catch mechanism and click
into place at the required height.
Using both shelves:
u
Lift the top glass plate and pull the bottom glass plate
forwards.
w
The glass plate (1) with the pull out stops must be at the
front so that the stops (3) point downward.
5.4.7 Door racks
Moving the storage rack
Fig. 32
Dismantling door racks
Fig. 33
u
The door racks can be dismantled for cleaning.
Control
* Depending on model and options 17
Loading ...
Loading ...
Loading ...