Loading ...
Loading ...
Loading ...
4.3.4 Moving the central bearing parts to the
other side
Fig. 13
u
Remove the washer.
Fig. 13 (1)
u
Remove the screws with the T25 screwdriver.
Fig. 13 (2)
u
Remove the cover carefully.
Fig. 13 (3)
u
Screw the bearing bracket and the film rotated 180° firmly
onto the other side.
Fig. 13 (4)
u
Attach the cover rotated 180° onto the other side.
Fig. 13 (5)
u
Push the washer in from the front.
Fig. 13 (6)
4.3.5 Moving the lower bearing parts to the
other side
Fig. 14
u
Lift the bearing pin completely upward and remove.
Fig. 14 (1)
u
Undo the screws with a T25 screwdriver and remove the
bearing bracket
Fig. 14 (2)
Fig. 15
u
Loosen the screw using a T25 screwdriver.
Fig. 15 (1)
u
Lift the door closure aid and turn it 90° to the right in the
hole.
Fig. 15 (2)
u
Tighten the screw using a T25 screwdriver.
Fig. 15 (3)
Fig. 16
u
Remove the cover and fix it on the other side.
Fig. 16 (1)
u
Place the bearing bracket on the other side and screw in
with the aid of a T25 screwdriver. Start with screw 2 at the
bottom in the middle.
Fig. 16 (2)
u
Screw in screws 3 and 4.
Fig. 16 (3, 4)
u
Insert the bearing pin completely. Make sure that the catch
mechanism is pointing to the rear.
Fig. 16 (5)
4.3.6 Moving the door bearing parts to the
other side
Bottom door
Putting into operation
10 * Depending on model and options
Loading ...
Loading ...
Loading ...