Loading ...
Loading ...
Loading ...
STEPS
TIPS IMPORTANT
5. Add laundry
detergent
and wash
products to
dispenser.
• Detergent, liquid chlorine bleach and liquid
fabric softener will be dispensed at the
proper times in the cycle.
• Water conditioners, detergent boosters
and enzyme products may be added with
detergent.
• See
Adding Laundry Products
for detailed
information on the use of various wash
products (detergent, bleach, stain treatment,
fabric softener, etc).
• See
Adding Laundry Products
for detailed
information on the use of the product
dispensers.
Use ONLY low-sudsing, high
efficiency detergent to prevent
oversudsing.
Follow manufacturer’s
instructions and
recommendations when using
wash products.
Open and close the dispenser
drawer slowly. Closing the
drawer too quickly could
result in early dispensing of the
bleach or fabric softener.
6. Select the
cycle and
settings for
the load.
• See
Cycle Selection, Cycle Settings, and
Cycle Options
for detailed descriptions of
cycle controls.
• See
Cycle Setting Charts
to determine which
settings are available for each cycle.
• To provide the best care, not every setting
or option is available with every cycle. If a
setting or option is not available for the cycle
selected, the indicator will not light.
Follow fabric care label
instructions on items to be
washed.
7. Start the
washer.
• Close the door and press Start/Pause. The
washer will not operate with the door open.
“Check the door” will be displayed as a
reminder to close the door.
• To add a forgotten item to the wash drum,
press Start/Pause and open the door.
“Pause” will be displayed along with the
estimated remaining cycle time. Add the
item, close the door and press Start/Pause
to resume the cycle.
• To change settings or options after the cycle
has begun, press Start/Pause, change
the settings, and then press Start/Pause.
Pressing the icons without pausing first
will emit several beeps but not change the
settings.
• To change the cycle once the cycle has
begun, press the Power button to turn OFF
the washer, press the Power button to turn
ON washer again, select a new cycle, and
press Start/Pause. Just pressing another
cycle icon will not change the cycle.
• To stop a cycle, press the Power button.
• A signal will sound at the end of the cycle if
the chime option has been selected.
DO NOT force door open. As
a safety measure, the door will
automatically lock during the
entire wash cycle and the door
lock indicator will be lighted.
Pause or cancel the wash
load to unlock the door.
If the cycle is interrupted
during spin, the door lock will
not release until the tub has
stopped spinning.
If the water level is above the
bottom of the door opening/
flexible door gasket, the lock
will not release.
8. Remove
items from
washer
when cycle
has ended.
• Remove items when the cycle ends and
place in dryer, line dry or dry flat as directed
on the fabric care label.
Excess wrinkling, color transfer
or odors may develop in items
left in the washer after the
cycle has ended.
Operating Instructions
8
Loading ...
Loading ...
Loading ...