Loading ...
Loading ...
Loading ...
Controls and Settings
Cycle Settings
Appropriate wash temperature, spin speeds,
soil level and options will be displayed for each
cycle. The settings can be changed before the
cycle is started. Make modifications according
to fiber content, colorfastness and soil level. If
changes are attempted after the cycle starts
a signal will beep and “Not possible” will be
displayed.
Spin Speed
Max, high, medium and low spin speeds are
available for each cycle. The spin speed and/
or duration of final spin vary from model to
model and cycle to cycle.
Increasing the spin speed will extract more
water, decrease drying time and conserve
energy. Decreasing the spin speed will reduce
wrinkling.
Select low spin speed to gently spin items
that should be line dried.
Use no spin to omit all intermediate spinning
phases and the final spin at the end of the
cycle. The load will be very wet. Remove items
from the wash drum to drip dry or select a
rinse & spin cycle to remove excess water at a
more convenient time.
Soil Level
Adjust the wash time based on the soil level
of each load. Extra heavy, heavy, medium,
light, and extra light soil levels are available.
NSF Protocol P172
Sanitization Performance of Residential
and Commercial, Family-Sized Clothes
Washers
hot
Use this setting for heavily soiled white or
colorfast cottons and blends.
warm
Use this setting for normally soiled white or
colorfast cottons or blends.
cold
Some warm water will automatically blend with
cold tap supply to achieve a precise cold.
Use this setting for lightly soiled non-colorfast
items, knits, delicates, and hand washables.
eco cold
Wash and rinse temperatures are equivalent
to temperature of cold tap supply. Use this
selection for fabrics and colors that are prone
to dye transfer. For use with cold water
detergents.
Wash Water Temperature
To change the preset temperature, press the
temperature icon to scroll to the desired
setting. A cold water rinse saves energy and
reduces wrinkling.
To protect your fabrics, not all temperatures
are available with every cycle. The indicator
will not light if the setting is not available with
that cycle.
Wash water temperatures are automatically
regulated to maximize detergent effectiveness
and improve washing performance. The
water heater setting and its distance from
the washer, water usage in other parts of
the home, and seasonally low ground water
temperature in some geographic areas can
affect water temperature.
sanitize
This setting sanitizes heavily soiled colorfast
fabrics such as towels, bedding, and
children’s clothing by killing 99.9% of bacteria
using wash water heated with a boost heater.
Cold water is used to cool and rinse the load.
NOTE
Only sanitizing cycles have been designed to
meet the requirements of NSF P172 protocol
for sanitization efficacy.
NOTE
To change the settings once the cycle has
begun, press the Start/Pause button, make
the new selection and press Start/Pause
again.
Follow the fabric care
label instructions.
For best results
13
Loading ...
Loading ...
Loading ...