Loading ...
Loading ...
Loading ...
Cycle Selection
Press the Power button to turn on the
unit. Press the icon for the cycle desired
and the indicator for that cycle will be
illuminated. The estimated cycle time, rinse
water temperatures, final spin speed, and soil
level for each cycle will be indicated for the
cycle selected. In most cases cycle settings
and options can be changed. “See Cycle
Settings”, “Cycle Options”, and “Setting Chart”
for more details.
Start/Pause
My Favorites
Soil Level
light
sanitize
eco cold
high
extra heavy
heavy
medium
extra light
delay
start
prewash
eco
friendly
fresh
rinse
spin
steam
cycles
heavy
duty
normal
delicates
casual
NSF Protocol P172
Sanitization Performance of Residential
and Commercial, Family-Sized Clothes
Washers
Controls and Settings
Not all cycles, options, or features listed are available on every model. Console shown
above for reference only. Your model may differ.
Power My Favorites
Cycle Options / Cycle Status Display
Cycle Selection
Soil Level Start/Pause
NOTE
Only sanitizing cycles have been designed to
meet the requirements of NSF P172 protocol
for sanitization efficacy.
Follow the fabric care
label instructions.
For best results
The wash water is heated by an internal boost
heater as the load tumbles. Cold water is added
to cool down the load prior to drain and spin.
normal
Select for cotton, linen, towels, shirts, sheets,
denims and mixed loads.
deep clean sanitize
Select to clean and sanitize heavily soiled,
colorfast fabrics including towels, bedding,
and children’s clothing.
It is recommended that you set your water
heater to 120°F (49°C) or higher to ensure
proper performance during this cycle. If the
setting is lower or the load is extra large, the
cycle time will be extended by 30 mins or more.
The deep clean sanitize cycle will kill 99.9%
of bacteria with no carryover of bacteria
NOTE
To change the cycle once the cycle has
begun, press the Power button to cancel
the current cycle, press the Power button to
turn on unit again, select a new cycle, and
press Start/Pause. Just pressing another
cycle icon will not change the cycle.
between loads. No bleach or harsh chemicals
are needed, but higher temperatures are
required. Please check fabric care labels to
prevent damage.
NOTE
If the voltage at your outlet is under 110 V
the internal heater may not adequately heat
the wash water. If the cycle is interrupted
while the water is heating, the final
temperature of the wash water may be lower
and sanitization may be reduced.
heavy duty
Use this cycle for heavily soiled, durable
garments - ex. towels, sports gear, or fabric
tote bags. For best soil and stain removal, use
the hottest water safe for the fabrics being
washed.
casual
Select for cottons and blends with a
permanent press or no-iron finish.
11
Loading ...
Loading ...
Loading ...