Loading ...
Loading ...
Loading ...
• Carefully pick up the dicing assembly using the nger holes in the top of the disc and place
in the workbowl over the centre post (G).
• Place the dicing disc with the grid facing the processor bowl handle (facing right) into the
processor bowl. The dicing disc can only be properly installed when grid faces the
processor handle.
• Push the dicing disc down, making sure it is secure in the work bowl.
• Grasp dicing blade by the centre using the nger grips. Insert the curved plastic edge under
the outer edge of the dicing disc (H). Place centre of blade down onto the top of the visible
dicing shaft in the centre of the dicing disc. You may need to rotate the centre of the blade
slightly to nd the t.
CAUTION: Be sure to only handle blade with the safe finger grips and never use your
fingers to direct food through chute.
IMPORTANT: Always place the curved end of the blade under the lip of the dicing disc
FIRST and then place the centre of the blade on the centre post of disc.
• Place the lid on the food processor and lock into place. Place the ingredients to be diced
into the feed chute. Turn the processor on LOW (speed 1) and use the food pusher to guide
ingredients down.
IMPORTANT: Do not use the dicing disc on MEDIUM (speed 2) or HIGH (speed 3). Only use
LOW (speed 1) for best results.
IMPORTANT: Be sure the disc has completely stopped spinning before removing lid from
processor.
9
Loading ...
Loading ...
Loading ...