Loading ...
Loading ...
Loading ...
• Carefully remove S blade by pulling shaft straight up. To remove S Blade from blade shaft,
turn counterclockwise and pull blade shaft out from bottom (P).
• Unlock processor bowl by turning it clockwise and lift off motor unit.
• Empty processor bowl.
• Unplug appliance when not in use.
USING THE MINI S BLADE IN THE SMALL WORKBOWL
• Lock processor bowl into position on motor unit.
• Place removable blade shaft onto the center post in the processor bowl.
• Place mini processor bowl in processor bowl, tting the tabs on the outside of the small
bowl into the notches on the large workbowl. This will hold the mini processor bowl rmly in
place (Q).
• Carefully place the mini S blade on blade shaft in bottom of mini processor bowl.
CAUTION: The blade is very sharp. Use caution when handling and storing – never handle
by the blade.
• Place lid on processor bowl and lock into place by rotating lid counterclockwise.
• Follow remaining steps as outlined in USING THE S BLADE IN THE PROCESSOR BOWL on
page 7 of this manual.
IMPORTANT: Discs and blades must be removed before removing small workbowl.
• To remove small workbowl from large workbowl, use the two nger grips to lift up.
HELPFUL TIPS FOR USING THE S BLADE
• The processor works very quickly, watch carefully to avoid over-processing foods.
• For best results, process foods that are about the same size.
• When chopping cooked or raw meat, the food should be very cold.
15
Loading ...
Loading ...
Loading ...