Loading ...
Loading ...
Loading ...
• Press MEDIUM (speed 2) or LOW (speed 1) to slice; press lightly but rmly on food pusher
to guide food through processor.
NOTE: Heavy pressure on the pusher does not speed the work; use the pusher only as a guide.
Let the processor do the work. Pushing too hard may result in inconsistent slicing thickness.
It is possible to change the thickness of your slices by changing pressure on the food item when
guiding it into the feed tube. Use more pressure for a thicker slice and less pressure for a thinner
slice.
Changing thickness settings with other discs or blades installed will have no effect on the
operation.
• When nished, turn the processor off by pressing PULSE|OFF, then switch off and
disconnect the appliance from the wall power outlet.
IMPORTANT: Be sure the disc has completely stopped spinning before removing lid from
processor.
• Carefully remove slicing disc by lifting straight up off centre post.
• Unlock processor bowl by turning it clockwise and lift off motor unit.
• Empty processor bowl.
USING THE SHREDDING DISC IN THE LARGE WORKBOWL
CAUTION: The disc attachments are very sharp. Use caution when handling and storing.
• Lock the large processor bowl into position on the motor unit.
• Place removable blade shaft onto the centre post in the processor bowl.
• Insert your ngers into the 2 large holes on the disc with the desired side up (small holes for
ne shredding and large holes for coarse shredding) and place shredding disc onto blade
shaft in processor bowl (M). You may need to rotate disc slightly until it ts onto post.
• Place lid on the processor bowl and lock into place by rotating counterclockwise.
CAUTION: Never use your fingers to direct food through chute
• Place food in feed chute and use food pusher to guide foods towards shredding disc.
• Press MEDIUM (speed 2) button; press lightly but rmly on food pusher to guide food
through processor.
Note: Heavy pressure on the pusher does not speed the work; use the pusher only as a guide. Let
the processor do the work.
• When nished, turn the processor off by pressing PULSE|OFF, then switch off and
disconnect the appliance from the wall power outlet.
12
Loading ...
Loading ...
Loading ...