Loading ...
Loading ...
Loading ...
The PULSE|OFF light will illuminate when the motor unit, lid and large pusher are in the
proper position.
Do not try to move the lid or the processor bowl while the motor is running.
The processor bowl cannot be removed from the motor unit when the lid is locked in place.
Remove the lid, and then remove the processor bowl.
The processor bowl cannot be locked onto the motor unit when the lid is locked in place.
Remove the lid, and then lock the processor bowl onto the motor unit.
OPERATING THE FOOD PROCESSOR
CAUTION: Always turn off and unplug from the wall power outlet before fitting or removing
attachments.
IMPORTANT: Do not run the motor for longer than 1 minute. After 1 minute, switch off for
at least 2 minutes to allow the motor to cool down.
USING THE FEED CHUTE AND PUSHERS
Note: Before operating the food processor, be sure the processor bowl, blades and processor
bowl lid are properly assembled on the food processor motor unit.
CAUTION: Never use your fingers to direct food through the chute.
• Insert the large food pusher into the wide mouth feed chute. Insert the medium pusher
inside the large pusher and the small food pusher inside the medium pusher. The food
pushers are used to guide ingredients through the feed chute. The small and medium food
pushers can be removed to add liquid or additional foods (D).
Note: The large pusher must remain in the feed chute in order for the processor to operate. The
unit will continue to operate if the medium or small pushers are removed from the large pusher.
• Place food to be processed in the opening of the large pusher. Use the medium pusher to
guide food through the large pusher and feed chute.
• Use the small food pusher to guide food through the medium pusher.
• Use the small food pusher as a measuring cup.
USING THE SPEED CONTROLS
Note: If the food processor does not run, make sure the processor bowl and lid are properly
locked on the motor unit and the large food pusher is fully in place. There is an automatic safety
lock that causes the food processor to stop working if the large food pusher pops out and/or the
lid and workbowl are not properly locked in place.
7
Loading ...
Loading ...
Loading ...