Loading ...
Loading ...
Loading ...
5. "Second row of seats"
6. "Temp. left:" or "Temp. right:"
7. Set the desired temperature.
The selected temperature is shown on the cli‐
mate control display.
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Maximum cooling
Concept
The system is set to the lowest temperature, op‐
timum air flow and recirculated-air mode with the
drive-ready state switched on.
General information
The function is available with external tempera‐
tures above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Switching on/off
Press the button.
The LED is illuminated when the sys‐
tem is switched on.
Air flows out of the vents to the upper body re‐
gion. The vents need to be open for this.
AUTO program
Concept
Air flow, air distribution and temperature are con‐
trolled automatically.
Switching on/off
Press the button.
The LED is illuminated with the AUTO
program switched on.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Second row of seats"
6. "Automatic"
Depending on the selected temperature, the
AUTO intensity, and outside influences, the air is
directed to the upper body and into the floor
area.
Intensity
With the AUTO program activated, the automatic
intensity control can be changed:
Press the lower or upper side of the
button: decrease or increase intensity.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Second row of seats"
6. "Level"
7. Set the desired intensity.
The air flow and air distribution are automatically
regulated depending on the selected intensity.
The selected intensity is shown on the climate
control display.
Adjusting the air flow manually
Concept
The air flow for climate control can be adjusted
manually.
General information
To adjust the air flow manually switch off AUTO
program first.
Seite 287
Climate control
CONTROLS
287
Online Edition for Part no. 01402913686 - X/19
Loading ...
Loading ...
Loading ...