Loading ...
Loading ...
Loading ...
Overview
Radar sensors
The radar sensors are located in the rear
bumper.
Always keep the bumper in the area of the radar
sensors clean and unobstructed.
Switching on/off
The system is automatically active after every
driving off.
The system is deactivated in the following situa‐
tions:
▷ When driving in reverse.
▷ If the trailer power socket is in use or trailer
towing is activated, for instance during opera‐
tion with trailer or bicycle rack.
System limits
The system may not be fully functional in the fol‐
lowing situations:
▷ When a vehicle is approaching at a speed
much faster than your own.
▷ When the approaching vehicle approaches
slowly.
▷ In heavy fog, wet conditions, or snowfall.
▷ In tight curves or on narrow lanes.
▷ If the bumper is dirty, iced up, or covered,
for instance by stickers.
▷ If the field of view of the sensors is covered,
e.g., by garage walls, hedges or snow hills.
▷ If cargo protrudes.
Emergency Stop Assistant
Concept
If the driver is no longer fit to drive, the system
helps to safely bring the vehicle to a standstill.
General information
The emergency stop function is not triggered
automatically. The emergency stop function can
only be triggered manually by the occupants.
When the system is activated, the vehicle is
brought to a standstill in its own lane by use of
lane guidance.
Depending on the equipment version and na‐
tional market version, the system includes a lane
change function.
With lane change function: On motorways or mo‐
torway-like roads, the system steers the vehicle
to the side of the road or shoulder where possi‐
ble. On other roads or under high traffic condi‐
tions, the vehicle is brought to a standstill on the
actual road.
Overview
Parking brake
Functional requirements
▷ The function can be activated at speeds of
approx. 6 mph/10 km/h up to approx.
155 mph/250 km/h.
Seite 212
CONTROLS
Safety
212
Online Edition for Part no. 01402913686 - X/19
Loading ...
Loading ...
Loading ...