Loading ...
Loading ...
Loading ...
Braking intervention
The warning prompts the driver to intervene.
The system may also assist in braking if there is
a risk of collision.
The vehicle can be decelerated to a standstill.
The braking intervention occurs only if vehicle
stability has not been restricted, for instance by
deactivating the DSC Dynamic Stability Control.
The driver may interrupt the braking intervention
function by stepping on the accelerator pedal or
by actively moving the steering wheel.
The system’s ability to detect objects may be
limited in some circumstances. Refer to the in‐
formation in this Owner’s Manual regarding the
limitations of the system and actively intervene
as warranted.
System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to condi‐
tions or other factors, the system may not re‐
spond. There may be a risk of accident or risk
of damage to property. Actively intervene as
warranted. Refer to the information in this Own‐
er’s Manual regarding the scope of the sys‐
tem’s operation and limitations.
Upper speed limit
The system responds to crossing vehicles when
your own speed is below approx.
50 mph/80 km/h.
Detection range
The system's detection potential is limited.
Thus, a system reaction might not come or
might come late.
The following situations may not be detected, for
instance:
▷ Crossing vehicles when they are hidden by
buildings, for instance.
▷ Vehicles that suddenly swerve in front of you,
or sharply decelerating vehicles.
▷ Crossing bicycles.
▷ Vehicles with an unusual side appearance.
Functional limitations
The system may not be fully functional in the fol‐
lowing situations:
▷ In heavy fog, wet conditions, or snowfall.
▷ In tight curves.
▷ If the driving stability control systems are lim‐
ited or deactivated, for instance DSC OFF.
▷ If the field of view of the camera or the wind‐
shield is dirty or covered in the area of the in‐
terior mirror.
▷ If the camera has overheated and been tem‐
porarily switched off due to excessively high
temperatures.
▷ Up to 10 seconds after the start of the engine
via the Start/Stop button.
▷ During calibration of the camera immediately
after vehicle delivery.
Seite 193
Safety
CONTROLS
193
Online Edition for Part no. 01402913686 - X/19
Loading ...
Loading ...
Loading ...