Loading ...
Loading ...
Loading ...
Before mounting
Before mounting child restraint systems, ensure
that the rear seat backrests are locked.
Move the rear seats into the rearmost position to
facilitate assembly of the child restraint system.
Third row of seats
Before installing a child restraint system on the
third row of seats, note the following:
▷ Roll up the cargo cover and remove the case.
▷ Depending on the equipment version: lower
the electric cargo cover.
▷ Remove the cargo area partition net.
▷ Bring seats and backrests of the second row
of seats into the most forward position.
▷ Fold down the respective backrest of the
second row of seats and lock.
▷ Raise the head restraints of the third row of
seats into the highest position.
Do not change the settings that have been made
after this.
On the front passenger seat
Deactivating airbags
Warning
Active front-seat passenger airbags can injure a
child in a child restraint system when the air‐
bags are activated. There is a risk of injury.
Make sure that the front-seat passenger air‐
bags are deactivated and that the PASSEN‐
GER AIRBAG OFF indicator light lights up.
Before installing a child restraint system in the
front passenger seat, make sure that the front,
knee and side airbags on the front passenger
side are deactivated.
Deactivate the front-seat passenger airbags au‐
tomatically, refer to page 181.
Seat position and height
Before installing a child restraint system, move
the front passenger seat as far back as it will go
and, if possible, bring it up to medium height.
This seat position and height ensure the best
possible position for the belt and offers optimal
protection in the event of an accident.
If the upper anchor of the safety belt is located in
front of the belt guide of the child seat, move the
front passenger seat carefully forward until the
best possible belt guide position is reached.
Backrest width
Adjustable backrest width: before installing a
child restraint system in the front passenger seat,
open the backrest width completely. Do not
change the backrest width again and do not call
up a memory position.
Child seat security
The safety belts in the rear and the front passen‐
ger safety belt can be permanently locked to fas‐
ten child restraint systems.
Locking the safety belt
1.
Pull out the belt strap completely.
2. Secure the child restraint system with the
safety belt.
3. Allow the belt strap to be pulled in and pull it
tight against the child restraint system. The
safety belt is locked.
Seite 130
CONTROLS
Transporting children safely
130
Online Edition for Part no. 01402913686 - X/19
Loading ...
Loading ...
Loading ...