Loading ...
Loading ...
Loading ...
Ultrasound sensors
Ultrasound sensors of the PDC,
for instance in the bumpers.
Functional requirements
Ensure full functionality:
▷ Do not cover sensors, for instance with stick‐
ers, bicycle racks.
▷ Keep the sensors clean and unobstructed.
Switching on/off
Switching on automatically
The system switches on automatically in the fol‐
lowing situations:
▷ If selector lever position R is engaged when
the engine is running.
▷ Depending on the equipment version: while
approaching detected obstacles if the speed
is slower than approx. 2.5 mph/4 km/h. The
activation distance depends on the situation
in question.
You may switch automatic activation when ob‐
stacles are detected on and off.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Driver Assistance"
4. "Parking and maneuvering"
5. If necessary, "Automatic PDC activation"
6. "Automatic PDC activation"
The setting is stored for the driver profile cur‐
rently used.
Depending on equipment, an additional camera
view is also switched on.
Automatic deactivation during
forward travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Switching on/off manually
Press the park assistance button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
The rearview camera image is displayed if the re‐
verse gear is engaged when pressing the park
assistance button.
Warning
Signal tones
General information
An intermittent tone indicates when the vehicle
is approaching an object. E.g., when an object is
detected to the left rear of the vehicle, a signal
tone sounds from the left rear speaker.
The shorter the distance to the object, the
shorter the intervals.
When the distance to a detected object is less
than approx. 10 inches/25 cm, a continuous tone
is sounded.
When there are objects in front of and behind the
vehicle at the same time, with a distance smaller
than approx. 10 in/25 cm, an alternating constant
tone will sound.
The intermittent tone and constant tone are
switched off if the selector lever position P is en‐
gaged.
The intermittent tone is switched off after a short
time when the vehicle is stationary.
Volume
The PDC signal tone volume can be adjusted.
Seite 248
CONTROLS
Driver assistance systems
248
Online Edition for Part no. 01402913686 - X/19
Loading ...
Loading ...
Loading ...