Loading ...
Loading ...
Loading ...
10
Fig 12
Anti-tilt restraint Once legs are adjusted to the correct height, fit the anti-tilt restraint brackets. The
anti-tilt brackets must be fixed to the rear wall as shown below.
1. To calculate the position of brackets up from the floor, measure to the bottom of
the anti-tilt bracket location slots on the back of the cooker and add 32mm.
2. Secure the brackets in position on the rear wall with suitable fixings. (Note that
brackets are fixed 60mm in from the side edges of the cooker).
3. Lift the cooker into place until it sits 130mm away from the wall then gently
manoeuvre the cooker further back until the brackets are fully inserted into the rear
side of the cooker. Care should be taken to not cause damage to the flooring or to
put unnecessary strain on the legs flooring or to put unnecessary strain on the legs .
Fig 13
Loading ...
Loading ...
Loading ...