Loading ...
Loading ...
Loading ...
4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
■ Tape measure
■Phillips
screwdriver
■ Flat-blade
screwdriver
■ ¹⁄8" (3 mm) at-
blade screwdriver
■ Level
■ Drill
■ Adjustable wrench
■ Slip joint pliers
■ Pipe wrench
■
15
⁄16" (2.4 cm)
combination
wrench
■ ¹⁄8" (3.2 mm) drill
bit (for wood
oors)
■ Marker or pencil
■ Flashlight
■ Masking tape
■ Pipe-joint compound resistant
to natural and LP gases
■
3
⁄16" (4.8 mm) carbide-tipped
masonry drill bit (for concrete/
ceramic oors)
■ Noncorrosive leak-detection
solution
■ Sheet metal aluminum tape
For LP/Natural Gas Conversions
■ ½" (13 mm) combination
wrench
■ ¼" (6 mm) nut driver
■
9
⁄32" (7 mm) nut driver
Parts Supplied
Check that all parts are included.
■ Air Filter (PN# W10748931)
■ Lower Filter Enclosure
■ Upper Filter Enclosure
■ Enclosure Front
■ Front Lower Access Panel
NOTE: This manual covers several models. Your product may
may vary from this image.
■ Hardware Bag
■ (5) M5 X 15 mm Screws
■ (3) #8 – 3/8" Screws
NOTE: Exhaust adapter
from the blower mounting kit
and lower access panel that
shipped with the range will
not be needed.
Loading ...
Loading ...
Loading ...