Loading ...
Loading ...
Loading ...
22
6. Unscrew the metal cover and unscrew the blue regulator
cap. Keep the washer in place.
A
B
A
C
A. Metal cover
B. Washer
C. Blue regulator cap
7. Flip the blue regulator cap over and screw it back into
the metal cover.
A. LP gas position
B. Natural gas position
A
B
8. Screw the metal cover securely back into place.
Do not overtighten.
To Convert Surface Burners (LP Gas to Natural Gas)
1. If they are installed, remove the burner grates.
2. Remove the burner caps.
3. Remove the burner base.
D
A
B
C
A. Igniter electrode
B. Burner cap
C. Gas tube opening
D. Burner base
4. Apply masking tape to the end of a
9
⁄32" (7 mm) nut driver
to help hold the gas orice spud in the nut driver while
changing it. Press nut driver down onto the gas orice
spud and remove by turning it counterclockwise and lifting
out. Set gas orice spud aside.
A
B
C
D
A. Igniter electrode
B. Orice spud
C. Orice spud holder
D. Screws
5. Gas orice spuds are stamped with a number on the side.
Replace the LP gas orice spud with the correct Natural gas
orice spud.
XXX
A
A. Stamped number
Refer to the following chart for the correct Natural gas orice
spud placement.
Natural Gas Orifice Spud Chart
Burner Rating Color Size (mm) ID Number
19,000 BTU (ST) White/Gray 1.84 184
17,000 BTU (ST) N/A 1.75 175
17,000 BTU White/Blue 1.90 190
15,000 BTU White/Green 1.80 180
9,200 BTU White/Black 1.35 135
8,000 BTU White/Yellow 1.25 125
5,000 BTU White/Orange 1.00 100
1,200 BTU Black 0.52 52
NOTE: Refer to the model/serial/rating plate located on the
oven frame behind the top right-hand side of the oven door
for proper sizing of spuds for each burner location.
6. Place LP gas orice spuds in the orice spud bag.
IMPORTANT: Keep the LP gas orice spuds in case
of reinstallation with LP gas.
7. Replace the burner base.
8. Replace the burner cap.
9. Repeat steps 1 to 7 for the remaining burners.
Loading ...
Loading ...
Loading ...