IP2M-841S User Manual

Loading ...

Below is an explanation of the fields on the P2P settings tab:

 Enable: This checkbox allows the user to enable the P2P feature for the camera. This feature must be enabled

for the camera to connect to a smartphone or tablet via the Amcrest View app. It is enabled by default.

 Status: This field displays the status of the P2P connection. Once the camera is connected to a device, this

field should display the word Online.

 S/N: This field displays the Token ID for the camera. The Token ID can be used to manually enter the camera’s

information on a mobile or tablet device in case the QR code scanning feature cannot be used.

 QR Code: This image is a Quick Response (QR) code. By scanning this image using the Amcrest View app, this

camera can establish a connection with the app.

To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save

the settings, click the Save button.

5.4.2.2 Connection

The Connection menu item has two tabs: Connection and ONVIF.

5.4.2.2.1 Connection

The Connection tab is where users can configure port connections. Below is a screenshot of the Connection

settings tab:

Below is an explanation of the fields on the Connection settings tab:

 Max Connections: This field allows the user to specify the maximum amount of users that can be connected to

the camera at the same time. The maximum number of users the camera can support at one time is 20.

 TCP Port: This field designates the Transmission Control Protocol (TCP) port number. The default value is

37777.

 UDP Port: This field designates the User Datagram Protocol (UDP) port number. The default value is 37778.

 HTTP Port: This field designates the Hypertext Transfer Protocol (HTTP) port number. The default value is 80.

 RTSP Port: This field designates the Real Time Streaming Protocol (RTSP) port number. The default value is

554.

 HTTPS: This checkbox enables the use of the HTTPS protocol for accessing the camera.

 HTTPS Port: This field designates the Hypertext Transfer Protocol Secure (HTTPS) port number. The default

value is 443.

To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save

the settings, click the Save button.

Loading ...

User Manual - Page 65