Loading ...
Loading ...
Loading ...
To swap the right (right side) and left (left side) audio channels
On either one of the speakers, press and hold the ST PAIR (Stereo Pair) button behind the cap located on the rear side
of the speaker.
You hear voice guidance and the right and left audio channels are swapped.
Hint
By using “Sony | Music Center,” you can establish a connection for the Stereo Pair function or terminate the Stereo Pair function.
To allow this, update the pre-installed software to the latest version on each and every speaker to connect for the function.
(For details about the update procedure, see Updating the pre-installed software.)
When making or receiving a call, only operate the speaker in which the
(BLUETOOTH) indicator lights up.
If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the
BLUETOOTH device that is connected to the speaker, there may be distorted sound or noise in the speaker output. In this case,
terminate the BLUETOOTH connection between the BLUETOOTH device and other BLUETOOTH device(s).
When using the Stereo Pair function, the codec automatically switches to SBC.
If the speaker is already connected with a BLUETOOTH device, touching another NFC-compatible device onto the speaker will
disconnect the BLUETOOTH connection with the previous device and establish a BLUETOOTH connection with the new device.
When a BLUETOOTH connection is immediately established between 2 speakers, the (BLUETOOTH) indicator and the
ST PAIR (Stereo Pair) indicator may not flash and the ST PAIR (Stereo Pair) indicator may light instead.
Set up the second speaker within 1 minute. If you do not set it up within 1 minute, the setting of the first speaker will be
canceled.
Operate the speaker in which the (BLUETOOTH) indicator is flashing to make a BLUETOOTH connection
with a BLUETOOTH device.
When the BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
speaker and the activity of the
(BLUETOOTH) indicator changes from flashing to lit.
4
Start playback on the BLUETOOTH device, and adjust the volume to moderate level.
5
Press the -/+ (volume) buttons on one of the speakers to adjust the volume.
Volume adjustment of one speaker is reflected in the other.
6
49
Loading ...
Loading ...
Loading ...