Loading ...
Loading ...
Loading ...
2
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A COMPONENT CABLE
■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
■ Image shown may differ from your TV.
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as
shown below.
► HDMI Audio Supported format : Dolby Digital, PCM
DTS Audio format is not supported.
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Signal Component HDMI
480i/576i O X
480p/576p O O
720p/1080i O O
1080p
O
(50/60Hz only)
O
(24Hz/30Hz/50Hz/60Hz)
Component ports on the TV Y PB PR
Video output ports
on DVD player
YP
B PR
Y B-Y R-Y
YCbCr
YPbP
1
Connect the video outputs
(
Y, P B, PR
)
of the
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO jacks on
the TV.
2
Connect the audio output of the external equip-
ment (digital set-top box, DVD, etc.) to the
COMPONENT IN AUDIO jacks on the TV.
3
Turn on the external equipment.
(
Refer to the external equipment's manual for
operating instructions.)
4
ANT
I
1
2
LAN
1
2
HDMI/DVI IN
3
WIRELESS
CONTROL
L/L/MONOMONO
R
AUDIOAUDIO
VIDEOVIDEO
AV IN 2AV IN 2
1
2
*COMPONENT IN3 jack is just composed by an
integrated video jack and an integrated audio
jack. And the integrated audio jack also can be
used as the AV IN2 jack.
Once you connected the integrated audio jack,
the AV2 connection remind OSD will display,
if you just need it as the component Audio jack,
please choose No.
Select the Component1/2 input source using the
INPUT button on the remote control.
If connected to COMPONENT IN 3, select
Component3 input source.
Loading ...
Loading ...
Loading ...