Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 291
DEALER SERVICE
An authorized dealer has the qualified service
personnel, special tools, and equipment to
perform all service operations in an expert
manner. Service Manuals are available which
include detailed service information for your
vehicle. Refer to these Service Manuals before
attempting any procedure yourself.
NOTE:
Intentional tampering with emissions control
systems may void your warranty and could
result in civil penalties being assessed against
you.
Engine Oil
Change Engine Oil — Gasoline Engine
Refer to “Scheduled Servicing” in this section
for the proper maintenance intervals.
NOTE:
Under no circumstances should oil change
intervals exceed 10,000 miles (16,000 km),
12 months or 350 hours of engine run time,
whichever comes first. The 350 hours of engine
run or idle time is generally only a concern for
fleet customers.
Engine Oil Selection — 1.3L Turbo Engine
For best performance and maximum protection
for turbocharged engines under all types of
operating conditions, the manufacturer
recommends synthetic engine oils that are API
Certified and meet the requirements of FCA
Material Standard MS-13340.
Engine Oil Selection — 2.4L Engine
For best performance and maximum protection
under all types of operating conditions, the
manufacturer only recommends 0W-20 engine
oils that are API Certified and meet the
requirements of FCA Material Standard
MS-6395.
Engine Oil Viscosity (SAE Grade) — 1.3L Turbo
Engine
Mopar SAE 0W-30 SN PLUS synthetic engine oil
approved to FCA Material Standard MS-13340
such as Pennzoil, Shell Helix or equivalent is
recommended for all operating temperatures.
This engine oil improves low temperature
starting and vehicle fuel economy.
The engine oil filler cap also shows the
recommended engine oil viscosity for your
engine. For information on engine oil filler cap
location, refer to “Engine Compartment” in this
section.
Lubricants which do not have both the engine
oil certification mark and the correct SAE
viscosity grade number should not be used.
Engine Oil Viscosity (SAE Grade) — 2.4L
Engine
Mopar SAE 0W-20 engine oil approved to FCA
Material Standard MS-6395 such as Pennzoil,
Shell Helix or equivalent is recommended for all
operating temperatures. This engine oil
improves low temperature starting and vehicle
fuel economy.
WARNING!
You can be badly injured working on or
around a motor vehicle. Only do service work
for which you have the knowledge and the
proper equipment. If you have any doubt
about your ability to perform a service job,
take your vehicle to a competent mechanic.
7
20_BV_OM_EN_USC_t.book Page 291
Loading ...
Loading ...
Loading ...