Loading ...
Loading ...
Loading ...
SAFETY 111
NOTE:
Whenever an audible alert is requested by the
BSM system, the radio is also muted.
When the system is in RCP, the system will
respond with both visual and audible alerts
when a detected object is present. Whenever
an audible alert is requested, the radio is also
muted. Turn/hazard signal status is ignored;
the RCP state always requests the chime.
Blind Spot Alert Off
When the BSM system is turned off, there will
be a related message on instrument cluster
display. If BSM system is off, this message will
be visualized every time the vehicle is restarted.
NOTE:
The BSM system will store the current operating
mode when the vehicle is shut off. Each time
the vehicle is started the previously stored
mode will be recalled and used.
Blind Spot Monitoring Fault Warnings
Blinded Sensor
In the case of a sensor that is blinded:
BSM Mirror Warning Lights are turned on
continuously
A instrument cluster dedicated message will
display
NOTE:
The rear bumper must be clean and free of any
obstructing debris.
System Not Available
In the case of the system being temporarily
unavailable:
BSM Mirror Warning Lights are turned on
continuously
A instrument cluster dedicated message will
display
In the case of the system being completely
unavailable:
A chime will sound
A instrument cluster dedicated message will
display
NOTE:
Vehicle must be taken to the nearest authorized
dealer for service.
General Information
The following regulatory statement applies to all
Radio Frequency (RF) devices equipped in this
vehicle:
FCC ID: RX2TCUFCA025N
IC: 4983A-TCUFCA02SN
This device complies with Part 15 of the FCC
Rules and with Innovation, Science and
Economic Development Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation.
4
20_BV_OM_EN_USC_t.book Page 111
Loading ...
Loading ...
Loading ...