Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR INSTRUMENT PANEL 69
scheduled oil change interval. The engine oil
change indicator system is duty cycle based,
which means the engine oil change interval
may fluctuate, dependent upon your
personal driving style.
Unless reset, this message will continue to
display each time the ignition is cycled to the
ON/RUN position.
To reset the oil change indicator after
performing the scheduled maintenance, refer
to the following procedure:
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and cycle the
ignition to the ON/RUN position (do not
start the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Place the ignition in the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
INSTRUMENT CLUSTER DISPLAY MENU
I
TEMS
NOTE:
The instrument cluster display menu items
display in the center of the instrument cluster.
Menu items may vary depending on your vehicle
features Ú page 68.
Speedometer
Push and release the up or down arrow
button until the Speedometer Menu item is
displayed in the instrument cluster display.
Push and release the OK button to change the
speedometer scale from MPH to km/h (or vice
versa).
Vehicle Info (Customer Information
Features)
Push and release the up or down arrow
button until the Vehicle Info Menu item is
displayed in the instrument cluster display.
Push and release the left or right arrow
button to cycle through the Vehicle Info
submenus and follow the prompts on each
screen as needed.
1. Tire Pressure
If tire pressure is OK for all tires a vehicle
ICON is displayed with tire pressure
values in each corner of the ICON.
If one or more tires have low pressure,
“Inflate Tire To XX” is displayed with the
vehicle ICON and the tire pressure values
in each corner of the ICON with the pres-
sure value of the low tire displayed in a
different color than the other tire pres-
sure value.
If the Tire Pressure system requires
service, “Service Tire Pressure System” is
displayed.
Tire PSI is an information only function
and cannot be reset Ú page 227.
2. Coolant Temperature
Displays the actual coolant temperature.
3. Transmission Temperature — Automatic
Transmission Only
Displays the actual transmission tempera-
ture.
3
21_MP_OM_EN_USC_t.book Page 69
Loading ...
Loading ...
Loading ...