Loading ...
Loading ...
Loading ...
20 GETTING TO KNOW YOUR VEHICLE
REMOTE START ABORT MESSAGE — IF
E
QUIPPED
The following messages will display in the
instrument cluster display if the vehicle fails to
remote start or exits remote start prematurely:
Remote Start Aborted — Door Open
Remote Start Aborted — Hood Open
Remote Start Aborted — Fuel Low
Remote Start Aborted — Liftgate Open
Remote Start Disabled — Start Vehicle To
Reset
Remote Start Aborted — Too Cold
Remote Start Aborted — Time Expired
Remote Start Disabled — Start Vehicle To
Reset
The message will stay active until the ignition is
placed in the ON/RUN position.
VEHICLE SECURITY SYSTEM — IF EQUIPPED
The Vehicle Security system monitors the
vehicle doors, hood, liftgate, and the Keyless
Enter-N-Go — Ignition for unauthorized
operation. While the Vehicle Security system is
armed, interior switches for door locks and
liftgate release are disabled. If something
triggers the system, the Vehicle Security system
will provide the following audible and visible
signals:
The horn will pulse
The turn signals will flash
The vehicle security light in the instrument
cluster will flash
NOTE:
The Vehicle Security system is factory
adjusted to standards from different coun-
tries.
The Vehicle Security system is a complemen-
tary security system developed to hinder the
occurrence of vehicle theft and prevent
vandalism. It does not prevent the theft of
your vehicle; the system is a deterrent.
The Vehicle Security system does not monitor
glass breakage or the movement of objects
or people inside the vehicle. The alarm does
not intervene in the case of vehicle tilt varia-
tions when it is parked.
TO ARM THE SYSTEM
Follow these steps to arm the Vehicle Security
system:
1. Make sure the vehicle’s ignition is placed
in the OFF position.
For vehicles equipped with Keyless Entry,
make sure the vehicle’s keyless ignition
system is OFF.
2. Perform one of the following methods to
lock the vehicle:
Push the lock button on the interior
power door lock switch with the driver
and/or passenger door open.
Push the lock button on the exterior
Passive Entry Door Handle with a valid
key fob available in the same exterior
zone Ú page 22.
Push the lock button on the key fob.
3. If any doors are open, close them.
21_MP_OM_EN_USC_t.book Page 20
Loading ...
Loading ...
Loading ...