Loading ...
Loading ...
Loading ...
324 SERVICING AND MAINTENANCE
Replacing Exterior Bulbs
Headlamps
Hi/Lo Beam Light Halogen
The bulbs can be accessed from behind the
front wheel liners with the following procedure:
1. Turn the front wheels completely.
2. Remove the wheel liner.
3. Remove the headlamp bulb cap.
Headlamp
4. Rotate the headlamp bulb socket counter-
clockwise then pull outwards.
5. Push on the locking tab on the headlamp
bulb connector and remove the bulb and
socket.
6. Install the new headlamp bulb making sure
it’s properly locked.
7. Install the headlamp bulb and socket; turn it
clockwise making sure it is properly locked.
8. Reinstall the wheel liner.
NOTE:
We advise referring to an authorized dealer.
Turn Signal Light/Position Lights/Daytime
Running Lights
To replace the bulbs proceed as follows:
1. Turn the front wheels completely.
2. Remove the wheel liner.
3. Remove the electrical connectors.
4. For the DRL bulb, grip the bulb at the top
and bottom locking tabs and squeeze to
and remove the bulb.
5. To replace the DRL bulb gently push bulb
towards housing. Be sure to hear both the
top and bottom locking tabs “CLICK” to
ensure the bulb is properly seated.
WARNING!
A transient high voltage occurs at the bulb
sockets of HID headlamps when the head-
lamp switch is turned ON. It may cause seri-
ous electrical shock or electrocution if not
serviced properly. See an authorized dealer
for service.
1 — Low Beam Bulb Cap
2 — High Beam Bulb Cap
WARNING!
Carry out the operation of replacing lamps
only with the engine off. Also make sure that
the engine is cold, to avoid the danger of
burns.
21_MP_OM_EN_USC_t.book Page 324
Loading ...
Loading ...
Loading ...