Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 47
A/C Button
Press and release the A/C button on
the touchscreen, or push the button
on the faceplate to change the
current setting. The A/C indicator
illuminates when A/C is ON.
The Air Conditioning (A/C) button allows the
operator to manually activate or deactivate the
air conditioning system. When the air
conditioning system is turned on, dehumidified
air will flow through the outlets into the cabin.
If your air conditioning performance seems
lower than expected, check the front of the A/C
condenser (located in front of the radiator), for
an accumulation of dirt or insects. Clean with a
gentle water spray from the front of the radiator
and through the condenser. If the problem
persists, please contact an authorized dealer.
Recirculation Button
Press and release this button on the
touchscreen, or push the button on
the faceplate, to change the system
between recirculation mode and
outside air mode. The Recirculation indicator
and the A/C indicator illuminate when the
Recirculation button is pressed. Recirculation
can be used when outside conditions such as
smoke, odors, dust, or high humidity are
present. Recirculation can be used in all modes.
Recirculation may be unavailable (button on the
touchscreen grayed out) if conditions exist that
could create fogging on the inside of the
windshield. The A/C can be deselected
manually without disturbing the mode control
selection. Continuous use of the Recirculation
mode may make the inside air stuffy and
window fogging may occur. Extended use of this
mode is not recommended.
In cold weather, use of Recirculation mode may
lead to excessive window fogging. The
Recirculation feature may be unavailable if
conditions exist that could create fogging on the
inside of the windshield.
AUTO Button
Press and release this button on the
touchscreen, or push the button on the
faceplate, to change the current
setting. The AUTO indicator illuminates
when AUTO is on. This feature automatically
controls the interior cabin temperature by
adjusting distribution and amount of airflow.
Toggling this function will cause the system to
switch between manual override mode and
automatic modes Ú page 49.
Front Defrost Button
Press and release the touchscreen
button, or push and release the
button on the faceplate, to change
the current airflow setting to Defrost
mode. The Front Defrost indicator illuminates
when Front Defrost is on. Air comes from the
windshield and side window demist outlets.
When the defrost button is selected, the blower
level may increase. Use Defrost mode with
maximum temperature settings for best
windshield and side window defrosting and
defogging. When toggling the front defrost
mode button, the Climate Control system will
return to the previous setting.
Rear Defrost Button
Press and release the button on the
touchscreen, or push and release the
button on the faceplate, to turn on the
rear window defroster and the heated
outside mirrors (if equipped). The Rear Defrost
indicator illuminates when the rear window
defroster is on. The rear window defroster
automatically turns off after 10 minutes.
2
21_MP_OM_EN_USC_t.book Page 47
Loading ...
Loading ...
Loading ...