Loading ...
Loading ...
Loading ...
62 GETTING TO KNOW YOUR VEHICLE
CARGO AREA FEATURES
Cargo Load Floor
The cargo load floor system has a load capacity
of 400 lbs (181 kg).
Cargo Load Floor Positions
The cargo load floor can be adjusted to three
different levels to create more space in the
cargo area. These positions are: upper, center,
and lower.
NOTE:
The lower position is not available in vehicles
equipped with either a compact spare tire, or a
full size spare tire. The center position is not
available in vehicles equipped with a full size
spare tire.
To change the level of the load floor, pull
upward on the load floor handle, pull the floor
outward, and place the back of the floor into the
desired position. Lower the front of the floor into
place.
Cargo Load Floor Positions
Raising The Load Floor
To raise the load floor for access to the Tire
Service Kit, or spare tire (if equipped), pull
upward on the load floor handle.
Do not raise the floor beyond the point of
resistance. In vehicles equipped with a power
liftgate, forcing the floor upward can damage
the floor and vehicle’s trim panel.
Raised Load Floor — (Power Liftgate)
To fully raise the load floor, pull upward on the
floor handle, pull the floor outward, then
position the floor upright with the bottom fitting
on top of the floor positioning brackets. Push
the top of the floor down firmly to secure it in
this position.
During power operation, personal injury or
cargo damage may occur. Ensure the lift-
gate travel path is clear. Make sure the lift-
gate is closed and latched before driving
away.
Personal injury or cargo damage may occur
if caught in the path of the liftgate. Make
sure the liftgate path is clear before acti-
vating the liftgate
WARNING! (Continued)
1 — Upper Position
2 — Center Position
3 — Lower Position
1 — Raised Floor Maximum Height
2 — Raised Load Floor
21_MP_OM_EN_USC_t.book Page 62
Loading ...
Loading ...
Loading ...