Loading ...
Loading ...
Loading ...
10 11
USING THE ELECTRIC ELEVATED COOKERUSING THE ELECTRIC ELEVATED COOKER
USING THE ELECTRIC ELEVATED COOKERUSING THE ELECTRIC ELEVATED COOKER
Ceramic Hotplates
WARNING
WARNING
If the surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
• The ceramic cooktop is made from ceramic glass, a
tough, durable material that withstands heating and
cooling without breaking. However, it must be noted
that as it is glass, it may break, and must therefore be
treated with care. Should you have any questions
about the glass in your new appliance, please contact
the service centre by dialling 13 13 49.
• The smooth glass surface has a pattern to show
where the elements under the glass are located.
• When a hotplate is on, the hot surface warning
light will come on. After switching off, this light
will continue to glow until the temperature of the
hotplate drops below 60°C.
• If the ceramic knob is accidentally cracked, switch off
the appliance to avoid electric shock.
Solid hotplates
The strong solid-cast hotplates give wide contact for fast
efficient cooking.
Hotplates are sealed to prevent spilt liquids from running
under the hotplates.
If there is a red dot present in the centre of hotplate,
this indicates it is a high power hotplate.
When necessary, apply a coating of hotplate protector to
solid plates to maintain them.
Electric oven fan forced baking
In a fan forced electric oven the heat comes from the
rear oven element. Hot air is distributed by a fan behind
the rear wall of the compartment, providing an even
temperature on all shelf levels. This means, batches
of food can be baked using multiple shelf positions
simultaneously.
Fan forced operation can be used for single food baking
with equal success.
Fan Forced baking generally requires lower temperatures
than conventional baking. Most recipe books, unless
stated, are typically for conventional oven temperatures.
It is recommended that when using the fan forced mode,
reduce the oven temperature by 10 degrees (refer to
‘Oven Guide’).
For best baking results preheat oven for 30 minutes.
Setting the cooking duration
• Select the desired oven function and temperature.
• The oven indicator light will glow and the heating
source will come on.
• Press the MODE button until the cook time
‘indicator’ begins flashing.
• Set the cooking duration you want by using the
and
buttons. 5 seconds after the last change the
cook time ‘indicator’ will stop flashing, and the time
of day will be displayed.
NOTE: Remember to add pre-heating time if necessary.
END
+
MODE
Setting the cooking end time
1. Check that the clock displays the correct time of day.
2. Select the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
3. Press MODE button until the end time
‘indicator’
begins flashing.
4. Enter the time of day you want to finish cooking by
pressing
or buttons. 5 seconds after the last
change, the end time ‘indicator’ will stop flashing and
the current time of day will be displayed.
Setting the delayed start cooking time
• Set the cook time and end time as described
in the previous sections.
• Once both the cook time and end time have been set,
the cook time and the end time ‘indicators’ will stop
flashing and the current time of day will be displayed.
• To stop the beeper, press any button.
Cookware
For best cooking results with electric ovens, silver or shiny
trays are recommended.
NOTE: Three button timer models MUST have clock set
after a power outage to operate oven.
3 Button Programmable Clock
Your oven is equipped with a 3 button timer that has the
following features:
• Timer
- you can set a countdown time that will
beep when the set time has elapsed.
• Cook time
- you can set cooking duration. A
timer will count down the preset cooking time, beep
when the time has elapsed and turn the appliance off.
• End time
- instead of setting a cooking duration
you can set a cooking finish time. When the finish
time has been reached the timer will beep and turn
the appliance off.
• Delayed start cooking time - you can combine the
cooking time and end cooking time to switch oven on
and off at a specific time during the day.
Selecting the timer
• Press the MODE button until the timer ‘indicator’
begins flashing.
• Set the countdown time you want by using the
and buttons. 5 seconds after the last change the
timer ‘indicator’ will stop flashing and the countdown
will start in minutes.
• To stop the beeper, press any button.
• Maximum countdown time is 2hrs 30mins.
END
+
MODE
To check or cancel settings
• To check your settings, press the MODE button until
the indicator you want is flashing.
• To cancel ‘delayed start’ press the mode button until
a light flashes next to ‘end time’
. Press and hold
the button until the clock no longer reverses (you
will hear a beep). If you have left the temperature and
function knobs at a setting the oven will start once
the ‘end time’ light stops flashing.
• To cancel ‘auto shut off’ press the mode button until
a light flashes next to ‘cook time’
. Press and hold
the button until the clock no longer reverses (at 0:00
you will hear a beep). This automatically cancels
‘delayed start’. If you have left the temperature and
function knobs at a setting, the oven will start once
the ‘cook time’ light stops flashing. Because you
have cancelled ‘auto off’ the oven will continue to
heat until you manually turn it off.
On completion of cooking
• The heat source will turn off, the timer will beep and
the end time and/or cook time ‘indicators’ will flash.
• Even though the heating element turns off the oven
will still retain substantial heat. This will continue to
cook the food until it is removed or the oven cools
down. If you do not plan on being present when the
oven turns off, you should take this extra heating time
into account.
• Turn the function and temperature controls to the
off position.
• Press any button to stop the timer beeping.
Adjusting the clock
• Press the MODE button until the clock ‘indicator’
begins flashing.
• Press the
or buttons to change the time of day.
5 seconds after the last change, the clock ‘indicator’
will disappear, confirming the time has been adjusted.
Loading ...
Loading ...
Loading ...