Loading ...
Loading ...
Loading ...
156
PROBLEMS CAUSES - SOLUTIONS
The kneading paddle is
stuck in the pan.
• Let it soak before removing it.
After pressing on ,
nothing happens.
• EO1 is displayed and flashes on the screen, the appliance
beeps: the appliance is too hot. Wait 1 hour between 2
cycles.
• EOO is displayed and flashes on the screen, the appliance
beeps: the appliance is too cold. Wait for it to reach room
temperature.
• HHH or EEE is displayed and flashes on the screen, the
appliance beeps: malfunction. The machine must be serviced
by authorised personnel.
• A delayed start has been programmed.
After pressing on ,
the motor is on but no
kneading takes place.
• The pan has not been correctly inserted.
• Kneading paddle missing or not installed properly.
In the two cases cited above, stop the appliance manually with
a long press on the button. Start the recipe again from the
beginning.
After a delayed start,
the bread has not risen
enough or nothing
happens.
• You forgot to press on after programming the delayed
start programme.
• The yeast has come into contact with salt and/or water.
• Kneading paddle missing.
Burnt smell. • Some of the ingredients have fallen outside the pan: unplug
the appliance, let it cool down, then clean the inside with a
damp sponge and without any cleaning product.
• The preparation has overflowed: the quantity of ingredients
used is too great, notably liquid. Follow the proportions given
in the recipe.
Extra ingredients stay
stuck in the dispenser
• There are too many ingredients into the dispenser. Do not
overload the dispenser. The lid must close easily.
• Do not put fat, sticky and wet ingredients into the dispenser.
TECHNICAL TROUBLESHOOTING GUIDE
Loading ...