Loading ...
Loading ...
Loading ...
56 GETTING TO KNOW YOUR VEHICLE
Driver And Passenger Temperature Up And
Down Buttons
Provides the driver and passenger with
independent temperature control.
Push the red button on the faceplate
or touchscreen or press and slide the
temperature bar towards the red
arrow button on the touchscreen for
warmer temperature settings.
Push the blue button on the faceplate
or touchscreen or press and slide the
temperature bar towards the blue
arrow button on the touchscreen for
cooler temperature settings.
NOTE:
The numbers within the temperature display will
only appear if your vehicle is equipped with an
Automatic Climate Control system.
SYNC Button
Press the SYNC button on the
touchscreen to toggle the SYNC
feature on/off. The SYNC indicator
illuminates when SYNC is on. SYNC
synchronizes the passenger temperature
setting with the driver temperature setting.
Changing the passenger’s temperature setting
while in SYNC will automatically exit this
feature.
NOTE:
The SYNC button is only available on the touch-
screen.
Blower Control
Blower Control regulates the amount
of air forced through the Climate
Control system. Adjusting the blower
will cause automatic mode to switch
to manual operation. There are seven blower
speeds available. The speeds can be selected
using either the blower control knob on the
faceplate or the buttons on the touchscreen.
Faceplate: The blower speed increases as
you turn the blower control knob clockwise
from the lowest blower setting. The blower
speed decreases as you turn the blower
control knob counterclockwise.
Touchscreen: Use the small blower icon to
reduce the blower setting and the large
blower icon to increase the blower setting.
The blower can also be selected by pressing
the blower bar area between the icons.
Mode Control
Select one of the Mode buttons on the
touchscreen or press the Mode
button on the faceplate to adjust the
airflow distribution. The airflow
distribution can be adjusted so air comes from
the instrument panel outlets, floor outlets,
defrost outlets, and demist outlets.
Panel Mode
Air comes from the outlets in the
instrument panel. Each of these
outlets can be individually adjusted to
direct the flow of air. The air vanes of
the center outlets and outboard outlets can be
moved up and down or side to side to regulate
airflow direction. There is a shut off wheel
located below the air vanes to shut off or adjust
the amount of airflow from these outlets.
Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
Keep all objects a safe distance from the
window.
CAUTION! (Continued)
21_JL_OM_EN_USC_t.book Page 56
Loading ...
Loading ...
Loading ...